Replacement Double Glazing Window Handles
If a double-glazed window handle is damaged, it's essential to replace it, ensuring safety and functionality.
uPVC handles work on a spindle that runs through the centre of the handle and into the lock mechanism of the window frame.
You will be required to be aware of the step height of your uPVC handle, which can be found by looking for screw cap caps on the inside face of the handle.
Tilt & Turn
In Europe, tilt and turn windows have been a popular option. However, they are only getting more popular in the UK. The advanced function of these windows makes them an excellent choice for new builds and renovation projects. They are simple to open and close, allowing ventilation and light into your home.
The locking points on the sash and the rubber seal that runs around the entire frame perimeter makes them more airtight than other window types. In contrast to uPVC casement windows tilt and turn windows are opened from both sides and this allows you to clean the exterior of your windows from inside your home.
It is essential to take into consideration the step height when replacing a tilt-and turn window handle. This is the distance between the handle's base and the point at which it is fixed to your window frame. It is vital to be precise about this as otherwise your window will not be able open properly.
Standard step heights for UPVC and aluminium tilt-and-turn windows are 21mm. Make sure that the handle you choose comes with this same height so that it fits in your existing window.
When selecting the replacement tilt and turn window handle, you should also consider the type of operation. Some handles have an lever that is down to lock, up at 90 degrees to tilt and straight upwards to open. This is referred to as a "tilt before turn" (TBT) safe handle, and you should utilize this feature when children are about in your home.
A spindle is typically located on the handle of most tilt and turn windows. This spindle can be adjusted to different locations, similar to a door lock. The length of this spindle can vary too. Some have a larger spindle and this can be adjusted by using a screwdriver that moves the shaft upwards or downwards. Some have a shorter shaft which can be adjusted only by loosening the small screw at base of the handle.
Casement
Casement windows are a huge hit due to a variety of reasons. It is simple to install and offers outstanding energy efficiency and noise reduction. There are a few typical problems with these windows. Homeowners must be aware of these. For instance, if your casement window handle breaks it may be difficult to open the window.
There are a few easy steps you can take to replace the handle of your window. Whether your casement window is new or old, you can follow these steps to ensure your home is secure and safe.
It is crucial to fix your uPVC window as soon as you can. This will help keep your home safe and discourage burglars. There are several alternatives to replace your window handle, such as cockspur handles and espag handles. However, it is important to select the appropriate handle to your window. If you have difficulty opening your window it may be due to the spindle in the handle is worn out.
When it comes to replacing your uPVC casement window handles there are a few things to consider. Included in this are the handle's size along with the screw centres and spindle dimensions. Take into consideration the type of lock you want and the colour. This is because the mechanism that locks your window will be contingent on the kind of handle you choose.
Espag handles are commonly used on uPVC window frames today. These handles are used to operate the espagnolette multipoint locks that are installed on your uPVC windows. They are available in a variety of colors and are available in non-locking or locking versions. They are also available with left and right opening styles.
Cockspur handles can be found on older uPVC double-glazed windows, however they are not used anymore. They differ from the aluminium equivalent in that they have different heights for the steps. They are typically 21mm, in contrast to the aluminium version, which is 9mm.
You can also use blade or spade handles as replacement handles for double-glazed windows. These handles have a similar design to cockspur handles but have a shorter spindle. They are typically used on older wooden frame double glazed windows, but they could also be found on some uPVC cottage windows.
Sash
If you have an old sash window you might need to replace the handles. This is because windows of this type typically have a system that comprises the counterweight, sash cord, pulley, and rails that allow the sash to move up and down easily. The sash's movement stops moisture from entering the frame, causing wood rot and mould. It also allows you to open the windows to let in fresh oxygen.
You'll have to measure the spindle of your sash windows in order to find the right handle. This can be found by looking at the back of the handle's base and measuring how far it goes into the frame. It is also necessary to take into consideration the window's hand, i.e. The handle will open either clockwise or anti-clockwise, depending on whether it's left-handed or right-handed.
Once you've selected the appropriate sash handles for your window, it's now time to determine if you require tilt latch. A tilt latch is used to hold the window up and is able to be fitted on double or single-glazed windows. They're available in three kinds: internal tilt latches, slide-in tilt latches and tilt latches with a surface mount.
You can also install an sashlock on your sash windows to increase security. This will prevent intruders from opening your window.
There are many different styles of sash handles to pick from. Espag handles are the most popular for uPVC Windows. They are typically slim and round with a locking mechanism however, there are also monkey tail or cockspur handle designs. upvc replacement door handles repairmywindowsanddoors are better suited for heritage windows, and have a more decorative look. However, they can also be found on casement windows.
Vertical Sliding
Vertical sliding windows are the ideal choice for smaller spaces. While horizontal sliding windows are popular for large openings, they can also be suitable for larger openings. These windows are easy to clean and offer excellent ventilation. They also do not require any maintenance that is why they are more economical than the alternatives. They are susceptible to damage in the event that you accidentally move the windows. This is the reason it is essential to install these windows in a location that is safe of pets and children.
You can open vertical sliding windows by dragging the frame to the left or right. The spiral balance is usually composed of a steel strip protruding from the window on one side and turned into a coiled shape. When the window is lower it is lowered until the hidden end of the spiral rotates to allow the sash to be lifted and closed.
Vertical sliding windows are usually constructed from real wood, which adds a classic look to your home. If you prefer a modern style, PVC-U can be found in a range of colors and finishes to fit your preferences. Some manufacturers even provide a woodgrain effect for an authentic look.
Vertical sliding windows are easier to open than double-hung windows in some circumstances. They are also less susceptible to moisture damage than wooden windows, which makes them a great option for families with elderly or children.
Certain homeowners put security features to their sliding windows to keep guests away from the house. To accomplish this, you can wedge a scrap piece of wood into the lower sash. You can then secure it to the frame to stop it from being fully opened. Consider adding a sliding-bolt keyed lock to the frame if you prefer a more sophisticated solution. This will provide you with peace of mind that your windows are secure, and your family will be able access them in an emergency.